Cómo Hacer Cuadro Navideño en Patchwork sin aguja Santa Claus y su Trineo ??

Hello friends, welcome to all my people
creative here to a project more in its channel Arte en Tus Manos, today I bring you
a picture made with patchwork technique previously we had already developed one, here it is, this picture here I leave you the link so they can watch the video,
but then they were asking us that we did others this time I’m going
to elaborate a bigger one I’m going to apply a new technique called
in Patchwork in 3D, I hope you like in this project, I hope you join me to do it and let out all that great creativity that we all have good friends for this project I’m going to use half sheet of porexpan with
a measure of 50 centimeters by 1 meter and the caliber that I’m going to use goes
to be of (4 cm) inch and a half you can handle this same caliber or the minimum
they should use is one inch well this is the design that I made for
our table and to be able to work it we must first transfer it to cardboard
or for a slightly thicker material that here then I made it in a paper of
dressmaking then we will transfer it a cardboard can be that cardboard
what I did was pass it on a poster here you see that
the pieces are loose then first we must pass everything that is the
background because we will work it first in the background
and what is the face of the Santa and the arms and reindeer we’re going to
work apart likewise the trees, are left then
here I am showing you the templates of the pieces that go in the
background first how can you see here they have numbers then everything that’s going to
going in the background will be numbered and the pieces that will shape the face to
Santa and the reindeer will go with letters of the alphabet then here you well already transfer and cut them I’m going to leave all these pieces in
the description of the video so that you can have the templates for
can easily elaborate after having already all the templates
cut what we’re going to do now is pass it to porexpan (polystyrene) we are going to do the
drawing in the porexpan and a way of doing it is taking the templates and the
Arming as if they were puzzles and we are drawing each one at the moment
that we are going to accommodate it Then the first thing we should do
before this is to make a margin to porexpan (polystyrene) let’s make a margin of
4 centimeters first in all its outline and then another 2
centimeters then already within this 2
centimeters that is the dimension that I I’m going to work with
start placing the templates as I mentioned them we are placing as
if it was a puzzle placing the lines very well and we’re going
checking so in this way we are doing the
draw slowly and we’re placing it very accurately
we are marking and in this way to measure that we are placing each piece at the end
we will have the drawing then the drawing that we are going to have initially is
only the base one seen how he had them mentioned because the father’s face
and the reindeer and the trees then the let’s work separately so that’s why
appear at this time good friends here then I already have
cut the pieces of the characters that we are going to overcome then
I want to show a little here what I did was to take the template of each one about
put it on the fabric in the color that correspond to each piece and we will leave
a little more than fabric size for example in this case it can be a
centimeter, one centimeter more we can leave in each piece for example in the
cap on the face on the arm in the glove
these pieces are going to be stuffed then let’s leave them that way a little bigger
so that when we introduce a bit of stuffed so they stay plump and do not go
to be smaller than we think leave it at the beginning, then there
some pieces that are going to go double example the reindeer, the reindeer also
we must cut double the legs, the body, the head so that
more or less like this is going to be the way, there are other pieces that go
simple for example the beard these trees these little van
simple these two big double doubles, of everyone in the molds I’m going to leave
specified which pieces go double and which are simple in the case of
horns here I will use a little bit of black eva rubber that you use and
frosty black but you can use a normal black, if they get it that way they can also use it ready friends then here we already have
all the pieces of the characters that let’s overcome now I’m going to
show how we should take out the pieces of base
to remove the pieces from the base we must do a procedure similar to the one
we did with the pieces of the characters here I wanted to show you the colors that
use locate each template in the corresponding color and in this case with
the pieces of the base we are going to leave a little more fabric already if you can
see there left over fabric can leave some 2 centimeters in each piece
approximately then in this if we must leave a little more fabric
depending then because here we go to introduce the fabric by the porexpan (polystyrene)
so we need good amount of fabric is not going to go stuffed
so we’re just going to introduce something that I also forgot
mention them before is that when we are going to locate the template
generally the fabrics are going to use on the back
to mark them then the template we will also use it for the
that’s why we should mark the templates which is the front in this
case these are numbered those of I have the characters numbered with
letters then we know that that’s the front we will simply locate it by
the back and the back of the fabric we also mark and afterwards she goes to
that is going to coincide we will look good when we place it on the side that is
already the template matches with the shape and that tie us
correctly in the whole figure that let’s do good now then let’s go
to proceed to introduce this fabric in the base of porexpan (icopor, unicel, polystyrene) good before introducing the fabric we must delineate very well in the in the
the pieces each of the pieces that we take out to be able to know
where to cut exactly ready then what I did
it was with a highlighter to delineate the painting the base of the picture that is the
that we are going to work at this time I also want to show you that we should
also have cut with batting the individual pieces ready the templates
which correspond to the base we should take a thin wadding this cloth is the
material that they put on quilts between was like to fill them by
some way to say it then we’re going to use a thin wadding
thin that we get only is by give some relief to the base of the
picture the correct way then is to take the
template and place it on the batting the wadding we are going to use is the same
dimension of which corresponds to picture then we will place each one
just like we did at the beginning what we can place as if it were putting together a
puzzle and let’s mark each piece individually ready in this in the
moment to cut each piece we are not going to leave a little bigger as well
we did with the fabric but we’re going to Exact cut, we need every
exact piece after that then that let’s have all the pieces marked what
we can start cutting and so we should have the batting and cut
well each independent piece as well what we did at the beginning to get the
molds then we must cut all these pieces and now if we can proceed
to put together our picture I remind you that we also have to cut some strips to
do the same in the framework of our picture … and then now if
we continue with our project friends with all the pieces already cut
now we can start to put together the picture then what we are going to do is
take a spear point cutter or a exact and we’re going to start drilling by
all the lines we are going to start delineate to say it somehow
to be able to introduce the fabric in these parts then the spear point cutter
we will introduce it here in the porexpan (unicel, icopor, polystyrene) we will introduce it more or less
up to half of the porexpan then anyway and we gave everything
it will not happen to the other side then We can work quietly if
We are working with this caliber of Then, what we do is
start to delineate with the cutter
and throughout the line where we had already marked as if we were cutting but not
let’s go through the sheet in this way let’s try to always leave
down the line for the guide we have in base of that first and in this same way
let’s complete the whole picture here for example then already complete the
outline of this piece then now let’s take a parrot beak lime like this
they call her in my country I do not know how the call in your countries
is this type of lime and we are going to start taking the pieces
for example first the piece of wadding the let’s place and then we will place the piece of
cloth then we will try to locate them
and proportional everywhere and at this moment we are going to
begin to introduce the fabric with this curved end of the file we’re going
to start introducing the fabric until completing the figure well in this way if suddenly they see that it is too much cloth
we can cut a little good friends here then I wanted
show them a little as I have already advance the table I already introduced these
three other pieces the important thing is to do it evenly and
distributing the fabric that suddenly does not we will be longer on one side
than in another at the time of introducing that we will not have very little fabric left on the other side then we introduce it in a
side and we are tempering the other side to the view and we are doing the same towards
here when we have finished introducing it it is important that with the same file
always with this curved part let’s go finishing aligning the fabric on when has introduced
then these parts and we do well so that it will not be suddenly
stacked the fabric here inside the slot and at the time of putting the cloth
that corresponds to this piece here does not is going to introduce us well and this
then when we finished introduce the fabric of these we do this
what am I saying and there we proceed to continue putting the other piece
these are small and with the cutter there cut or perforated all the whole
the drawing so here I am going to show you
again we take a small piece of wadding and the fabric that corresponds to that piece
and we’re simply going to introduce it as that go entering
where it corresponds there are times when the fabric suddenly
does not give us then we must do small cuts for example in this part, we look to go entering couple and we are giving the
shape of the piece that we want introducing a side let’s go
introducing the other in this way the figure is already we try that
the wadding does not come out and go being well armed friends like this and this way way then let’s do
all the rest of the pieces that we complete the picture with
here a small piece after we ended up finishing off thus distributing
the fabric that remains inside we can not introduce too much
lime because we can drill or go through the porexpan (icopor, unicel, polystyrene) here is another piece
more and we continue with our project good friends then here we already have
almost the base of the finished picture here What I did was to introduce the fabric to
make the internal margin of the box here You can see the house the sleigh with
gifts, then all of these pieces are almost finished is it
I had forgotten to show you something that suddenly at first I overlooked it
but then here I am going to show you we must also make a margin for the
back of the box a margin of 2 centimeters from the end inwards
then let’s make a margin 2 centimeters and that margin also what
let’s drill with the cutter let’s go introduce the cutter and do the same as
we did for the front part here in the corners we must also make a
diagonal and enter the cutter but then we will not introduce it
much more or less a centimeter of depth in these diagonals because
on the other side we must also do the same
look here the diagonal of this part of the front is longer but then
we need you not to find those cuts then we should introduce
approximately one centimeter to each side because this porexpan (icopor, polystyrene) has 4
centimeters thick, then here we still need to give it a little
more decoration to the pieces by example we should decorate the gifts and
some details that we are going to place this then is almost finished the
basis of our table and now we’re going to continue working with the characters good friends then here I already have the ready characters we already have all the
cut pieces I only have here put one on top of the other to
show them how it should be done so here I want to show you also
what elements are we going to use additional for example buttons we’re going to
need two buttons can be about buttons so colorful we are also going to
need jingle bells a colored ribbon it can be like that in two tones and we’re going to
use a little gold cord also a half middle button buttons
ball is called this this button is for the eyes of santa and we will need
some small beads of black color for the eyes of the reindeer here in the
trees at the beginning I had them shown
We are going to cut two pieces for the trees in different shades but
then additional to that we cut another piece to overcome to give a little
of contrast to the trees so that they do not look one color ready then
with the trees and with the pieces of of the reindeer and the face of santa the hat
and the arm what we are going to do as they are double pieces are going to be joined by two
ends and then we will introduce the filling, the filling that we are going to use
it’s called siliconized cotton this is what we are going to introduce no
we must not put too much that we it is too fat each piece but
what proportional, then here is some pieces that as I mentioned we are going to fill and others that are only to hit on seen sunsets these are
the pieces that are going to measure on sunsets and all this we are going to unite for now
with hot silicone if you want use the stitch stitch a stitch that Lili has also done in other tutorials can join them with
Festo stitches and then fill but then I’m going to do it with silicone
hot then now we can start to join our characters
to start then I’m going to take the I reinvent this then what we are going to do
as I had mentioned to you is to take the two pieces and we are going to join them for this
we must always be very careful in that the pieces are well located
and we’re going to start applying the silicone a thin line, a thin line and it must be continuous not
We can leave any piece without applying because then there will be us
A hole this we are going to apply first a
part and then the other As I told you, we must locate what
is perfectly aligned and we should not put too much pressure
so that the silicone does not come out the edges in this way gently press for example here in the leg we should
leave the bottom part to be able to Fill A) Yes the silicone should be fine
hot after it is already well joined
we will proceed to introduce the cotton silicone or cotton for filling so
through the hole that we left in the part down It is good that you let it dry
very well the piece to start introduce the cotton
then as you see here we are doing a little pressure for the cotton
between very well in the piece and we are going to take a little more we can fill in that proportional we should not exaggerate in cotton and the piece it is well proportional
we introduce that nothing will remain of cotton on the outside at the moment of
paste and here in the last part
we finished sealing the piece do not apply too much silicone
neither and try to make it on the edge
and we’re going to stick more in and how is the piece
I am already the paw of the united reindeer
in the same way then we are going to fill all the other pieces equally
that the face of santa the cap the arm and hand good before continuing filling I wanted to stop to show you how
put together the face, then the face the we are going to paste also in the same way
we leave a space to fill in but then before filling we are going to paste
these pieces here is the snout that are the pieces to superimpose then is
the nose and the snout that we are going to hitting like this is going to stay together like
the ears then these two pieces the let’s join with silicone so that
so they already have lists then what what we are going to do is apply silicone and
stick the muzzle in the part correspondent
after that then we are going to lift here we are going to paste the silicone we are going to
paste up here and then there we go to begin to stick your ears
then we are going to leave a little more above we are going to apply a point of
silicone let’s do it here once and for all if we apply the silicone point
let’s hit the ears it will be like this inside
and the horns in the same way go more up, are foami or eva rubber so, then when we follow the piece all this is going to be inside we are very well
ready look how it looks then what we are going to do is fill in and
we end up sealing then we will stay like this
in this way, when we are finished of
fill and seal then we go to take the accounts we had and we’re going to
paste a two sales to the little eyes we let’s paste on the site
correspondent well then here I already have the
pieces and I have sealed except the Santa hat this still not what
let’s seal we just paste here on the edges this part we leave it
open and what corresponds to the glove to Santa’s hand is not going to
close in this part below you subtracted all the other pieces were filled
and sealed now I’m going to show you a little as we should arm the reindeer for
arm this reindeer then with everything this sealed as I told you now let’s
continue decorating with the other pieces that great superimpose then this
piece is for the rear leg this for the front leg we are going to paste these
pieces with silicone the pieces this I did with silicone
join all these pieces as they already had mentioned earlier but if
you want can use a stitch called festo stitch
then I go back and I remind you had mentioned but then there are
people who really like this guy stitch otherwise
we must apply the silicone very well and it’s a good slim cord I wanted to go back
to take back that information so that it well clear
Now let’s paste the pieces by applying hot silicone then simply
now let’s apply in this part and we are going to stick more pieces in the
part that corresponds to the face I had told them that we were going to hit
some beads (spheres) then what I did was cut ovals in colored cloth
white and I pasted the beads (spheres) to the fabric well then we will be more
expressive face we’re going to do this way, this is like the chair
of the reindeer, it’s like a saddle we are going to paste it here we are going to apply the
silicone on the top edge first and we are going to match it with this
this way around here after I’m well stuck then we have left these
long cords to these pieces because no I showed them but I hit the cord like that
as delineating the and we are going to let the cord remain
long up and down and this piece It’s also going to be longer and ready
after this is here dry and well stuck let’s stick the laces
backwards we’re going to apply a bit of silicone here and we’re going to paste the
laces so that this goes around and do not go to see the tips ready not
we are going to be the tips looking and it is more aesthetic then when you paste it
well and when you paste it down here and give the back you will see one more appearance
good aesthetics friends here I have a reindeer already armed that I want to show you
how it looks here already the pieces are united look
and this part and here I put a necklace with a bell
look how it looks that’s how our reindeer should look and now
we can proceed to assemble Santa’s head well then to put together the head of Santa let’s take the hat that I eat
I mentioned them we have not sealed it yet and we will place it in the position
correct this position would be leaving this part of where is this curve
we leave about two centimeters up and we will have as a guide to
this part to paste the hat then would go from there down to where
get here to the top then we apply the silicone first
On the one hand we introduce the head we locate it as it is and we are going to let
paste after very carefully let’s apply another bit of silicone on the
part what remains to be pasted in the part that
is missing and we will sustain also until it is well stuck
after the cap is firmly fixed let’s take the beard
this beard use a stuffed animal then we are going to place it in this way
then as you realize this have a curve here let’s let
between the hat more or less three centimeters
the fact is that the location of the beard is this
comes from here and goes around the face until it meets or ends
with this curve with this curvita that is the precise location of the beard
then the first thing we do is paste this and now let’s paste the whiskers
in the eyes and eyebrows good friends here and I hit then the
beard and hat look here sealed here on both sides and the beard located in
the way I had shown you here press two points where I’m going to paste the
I made my eyes with the buttons half ball and just like in the
reindeer I cut a circle in cloth and the I pasted on these for later
locate them in the face then the little eyes still
we do not hit them depending on how we let the rest then here we go to
locate the mustache all this remember that I’m hitting
with hot silicone then the mustache we should see this
curve that has the beard to locate it correctly and this we are going to do this
so that we stay like this then for keep in mind we will not be left
run the mustache make the location so we stayed like this and the
whiskers giving this location this way now we’re also going to paste this
part that is characteristic of the cap holy then this piece we’re going to
superimpose by applying the silicone here by the edge or in the piece and that is not
we will be seeing the red part on this side, for this
we must put it on the right side, it’s not going away to be watching this
A) Yes after having that piece already joined
then we proceed to paste the eyes you place them
depending as they have been stuck the beard and the whiskers you place
the eyes first where they want it to be and there in Mark with a pencil soon
they make a point like that the same as I did so that later they can put the
silicone and paste it more easily and then let’s hit the eyebrows are about
bits that cut in a triangle to give the shape of the eyebrows in this same
material or if they want the white fabric in the one that we made the bottom of the eyes
then this would be for the face and for last we are going to cut a circle in cloth
in fabric of the same color as the bottom of the from Santa’s skin, a circle of 4
centimeters and a half in diameter and with needle and thread we will start to put the
needle around the contour for later be able to pull the needle and make a nose
this then this what we are going to do is to talk about it and look at the fabric is collected and
will give us a rounded shape for this we are going to take a little
silicone cotton we are going to introduce you cotton
and then we are going to tighten well so that this make the shape of the nose
already with the cotton in then with the thread we can finish and after that
we try to round it up a bit more when we have it secured with the
what we are going to do is apply a little silicone in the back and
we are going to stick it here where the nose corresponds and so the face of Santa must be ready already here paste all the parts
also place a gold cord for give more decoration to the hat and a
rattle that I sewed here on the tip this way the head of the
santa now let’s put together the arm to the arm then let’s take it in
this position the thin part for up and it’s wide down we’re going to
place the glove that as I mentioned them We did not previously seal
apply the silicone in this part and then we’re going to hit it like that
When it is dry, we will take a little fabric of this same
we use for the hat and we’re going to cut a strip which we paste from this
way so that the arm in this way We will not join the arm to the head
because all these pieces are going to join one by one at the base of the box
I also want to show you the trees he had taught them they are already stuffed
we should not introduce too much stuffing and we sealed it in this part
and here with the double color so that different tonality and here the little ones
I also hit this part already good friends continuing with the base
now we are going to finish doing some details that are missing for example
here I will place a golden cord we we take a cord we tie a knot with
the two rings almost at the end and this we are going to paste it right in this
part our part that is the sack of gifts
then we apply silicone for all that edge here at the ends what
we do it with the same file as we use before we are going to introduce here
the ends so they do not stay watching and applying the silicone so you are
tapes that you see here is for place the ribbons traversed here
every gift then here I chose these colors you can choose others the
what do you like and then we are going to place a tape like that and another like that
we are going to place crossed ribbons like when the gifts are tied with ribbon
then that a little more decorated for the moon I got a lace
combined with silver and gold this is optional if you want to do it if
they do not leave it easy and simply this we do the same thing we apply silicone
we introduce the ends and here in the home
with a thinner tape can be of dark blue color as well as this or of
black color we are going to introduce the tape well to make them like the bars of
the time of the windows and here we do what then we apply some dots
of silicone and on the ends we introduce the tape here for the
chimney I cut a piece for to introduce it in this way as
we will have a little snow we do the same procedure then the chimney will be like snow on the tip ready friends let’s do this and
then we will place what is the coating the frame then let’s
place the fabric I will use a fabric of green color doing the same
procedure introducing it here we turn around and we are going to introduce
by the other slot that we had already made good friends here then I already put you
the coating to the frame look how it looks and I also made a
effect to the house we can do here all right
here at home What I did was draw some lines and that
I did it with a brown marker then we just do it like that
we trace with a rule we are guided and that give an appearance that is wood
then it is a detail more also them I want to show that here at the extremes here at the extremes, it suddenly
forgot to mention in these extremes we should make a cut in
diagonal with the cutter let’s make a cut like that diagonally
to be able to introduce the fabric and that agree here with both sides after
to enter it we can take a bit of liquid silicone and apply a little to
that the fabric does not come out this in the I also want them back
show something else I have not yet placed this piece covering all this then
here what we are going to do is place this
this piece is a piece of cloth take a cord the cord is about 25
centimeters long and this piece has about 12 centimeters long
by 4 or 5 centimeters down ready this is to place it here back and power
have how to hang the picture ready then we are going to make a mark of
20 cm inwards end on both sides and this piece is going to
paste even if we coincide just in this then we are going to locate that the
cord or lace remain below if you want it to excel what can
put like this or preferably we paste it that is flush with the frame, we will stick how to make two pieces and we’re going to leave them here
the brand we made of 20 matches centimeters then in that part just
let’s paste simply by applying a little hot silicone we leave one side and then paste the
other let’s say these two pieces and after
that then we’re going to start enter the fabric that corresponds to
this part already when we get to is this side what we are going to do is
search and make a small cut in the fabric to get this cord or the
cord over there and that since our ready picture that can be hung
ready then here I already introduced the cloth and I took out the ropes and as I mentioned
we make a small hole and we simply take out the cord to each
good side already with this well and finished we can continue with the part
the front and what we are going to do is start hitting the characters
then let’s take the arm of santa and the head and the first thing we hit is
the arm guiding us always with this same shape of the sled then let’s
take the arm and we will place it like this ready then
we are going to apply silicone in this part and what we are going to do is
place it and make pressure we already know in what position are we going to hit then
easy to see the gold and we are going to press for it to be
well fixed after this piece is already
stuck then we continue with the head of Santa Santa’s head then guiding us
can also be located with the drawing can be guided with the drawing then
more or less we know what this part of here
a little between the moon and the gifts that to this tip of the hat anyway
It is so strict if you want it hit more raised or be like you
wish you can locate it here let’s stick first apply silicone
in the head and then we’re going to apply on the border we apply the silicone well fixed in the same way as we did with the
arm then let’s make pressure so that he is well stuck
and so the saint is already well stuck after that then we are going to paste
the trees here I already locate them guiding me with the position is from the
I draw here this other tree also already I stuck it and this big then the way
of pasting these trees as they are rellenos entonces vamos a pegarlo aquí
en el borde y vamos a aplicar un poco de silicona
here in the center principalmente necesitamos que acá esta
parte de abajo quede bien unida bien pegada el resto ya va a quedar un poco
levantado pero entonces esta parte de abajo debe quedar bien unida acá hacemos un poco de presión y ya queda pegado y es que en esta parte no va a quedar
levantado del árbol lo mismo que hicimos in this
bueno y ahora ya podemos pegar los renos vamos a tomar cada reno
aquí les voy a mostrar yo a estos renos les coloque un cordón, este tiene un
largo de 15 centímetros se lo tape aquí con la unión, con un botón cada uno y el otro
tiene un cordón de 30 centímetros de largo entonces el reno el del cordón corto
lo vamos a ubicar aquí en esta parte donde está la manito del Santa que
coincida con esta parte y este cordón lo vamos a pegar con con un punto
de silicona debajo de la mano de Santa y el otro reno que va a quedar aquí más
corrido y más hacia abajo vamos a pegar el cordón por la parte de arriba de la
mano de Santa esto entonces con un punto de silicona
nos van a quedar así las dos cuerdas ya estos muñecos de todos modos no hay que aplicar demasiada silicona podemos aplicar un poco aquí en el cuerpo en la
cabeza y un pequeño punto en estas partes si ustedes quieren dejar que las patas
queden así libres entonces solo aplican en el cuerpo y en la cabeza esta es la
manera correcta de pegar y de ubicar los renos bueno amigos y queda listo nuestro cuadro que he hecho en técnica patchwork en 3D espero que les haya gustado este proyecto que lo disfruten bastante y en
esta temporada navideña también quiero invitarlos a que se suscriban si aún no
lo han hecho para que formen parte de esta gran familia y también recordarles
que activen la campanita para que les llegue la notificación de cada nuevo
proyecto que hagamos, bueno amigos como siempre esperando que estén con nosotros
en cada nuevo proyecto un abrazo fuerte para todos y nos volvemos a ver aquí con
más Arte en Tus Manos